Don't kill your board
Drawn, never filmed.
- The 5 volts from your computer's USB port can't shock you. Wall power can kill you. This channel never wires it.
- Unplug the USB before you move any wire.
- Never connect 5V straight to GND.
- Never wire a pin that's set as an output straight to 5V or GND.
- Nothing over 5 V on a pin. No 9 V battery straight to a pin.
- Every LED gets a resistor.
- Motors never go straight on a pin. They need a driver.
- Don't set the board on metal or loose bits of wire.