Broke AutomationAutomation on a $100-a-month budget

Learn

The why behind the builds. Long videos link here when there's more than a Short can hold.

Concepts

Each one unlocks with its video.

LockedVoltage vs currentPressure vs flow, measured on the bench.
LockedOhm's lawWhy every LED needs a resistor.
LockedSeries vs parallelTwo buttons, two very different results.
LockedWhy factories use 24 V DCAnd why your kit runs on 5 V.
LockedSinking vs sourcingThe PLC wiring question everyone gets wrong once.
LockedAnalog signals0-10 V and 4-20 mA, the languages sensors speak.
LockedRelays and inductive kickWhy a relay coil needs a diode.
LockedAC vs DCExplained with drawings only. This channel never wires mains.

Unlocked

Kit vs factory

The part on your desk, and the one doing the same job in a real machine.

JobIn your kitIn a factory
Signal voltage5 V from USB24 V DC, most often
Push to start6 mm pushbutton22 mm panel pushbutton with contact blocks
Sense somethingUltrasonic sensor, light sensorInductive proximity sensor, photo-eye, ultrasonic level sensor
Show statusLED with a 220 Ω resistorPilot light, stack light
Switch a bigger load5 V relay, driven by a transistorInterposing relay with a 24 V DC coil; a contactor for motors
Connect itBreadboard and jumper wiresTerminal blocks on DIN rail, with ferrules
The brainUNO-compatible boardPLC (on this channel: a Click PLC first)