Broke AutomationAutomation on a $100-a-month budget

Builds › Kit Unpacked › KU-02

The Board: your first code

Easy15 min$0 extraParts: board, USB cableVideo: Kit Unpacked #2
  1. Step 1

    Download the Arduino IDE

    It's free. Get it from the official site only: arduino.cc/en/software. Copycat download sites exist.

  2. Step 2

    Plug in the board

    Use the kit's USB cable. The little L light may already be blinking: that's a test program from the factory. On Windows, if the IDE offers to install drivers the first time it opens, say yes.

  3. Step 3

    Open Blink and change two numbers

    Open the IDE, then File > Examples > 01.Basics > Blink. It's already written for you, and it may open in a new window: do the rest there. Scroll past the grey text at the top to loop(), and change both 1000s to 100.

  4. Step 4

    Pick the board, then Upload

    In the board selector at the top, pick Arduino Uno and its port. If it shows as "Unknown," click it and pick Arduino Uno. Not sure which port? Unplug the board, look at the list, then plug it back in: the new one is yours. Click Upload (the arrow). When it says "Done uploading," the light blinks fast. That's your code.

void setup() {
  pinMode(LED_BUILTIN, OUTPUT);
}

void loop() {
  digitalWrite(LED_BUILTIN, HIGH);  // light on
  delay(100);                       // was 1000
  digitalWrite(LED_BUILTIN, LOW);   // light off
  delay(100);                       // was 1000
}

setup() runs once when the board starts. loop() runs forever. 1000 milliseconds is one second. Try 50 in both places, then turn off the lights.

Want to keep your version? File > Save As and name it my_blink. The original Blink is always in File > Examples.

The kit's board up close

If it doesn't work

No port shows up

Try another USB cable or another USB port. Some cables only charge.

The upload fails

Check that the board says Arduino Uno and that the port is the one that appears when you plug the board in.

I have a Chromebook

Use the free Arduino Cloud Editor (cloud.arduino.cc) instead of downloading the IDE. Its menus look a little different. The free plan allows 25 compiles a day. A school Chromebook may block it; try a home computer.

I only have a phone or an iPad

Those can't program the board. You need a computer.

Engineer mode

That blink is a heartbeat

Engineers program one into factory controllers. If it ever stops, the operator's screen flashes an alarm.

Next

KU-03 The Breadboard

Coming soon. Meanwhile, read the safety page before you wire anything.